Features & Specifications

  • Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.
  • Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
  • Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate.
  • Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
  • J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
  • Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
  • Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
  • Pre-drilled and tapped at the factory for mounting of the lasher guard or “halo”. For use when lashing in overgrown areas.
  • The J2 is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe.
  • The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use
  • Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual

Related Products

5′ Fiberglass Tangent Crossarm, #6500 Vertical Load
Part#: 600-100159
5′ Fiberglass Tangent Crossarm, #6500 Vertical Load

Crossarm, Tangent, 3 5/8" x 4 5/8" x 60", Fiberglass, Price Per Ea

Price: RFQ
3/8″ x 2″ B Strap Nail
Part#: 600-100170
3/8″ x 2″ B Strap Nail

Nail, B-Strap, Galvanized Flathead, 3/16" x 2", Price Per Box, 53 Per Box

Price: RFQ
1.5″ x 3/8″ x 162 CU CTD Rolled Point Staples, Copper Coated
Part#: 600-100127
1.5″ x 3/8″ x 162 CU CTD Rolled Point Staples, Copper Coated

Staple, Rolled Point, 1.5" x 3/8" x 162 CU CTD, Copper Coated, Price Per Ea, Sold in Packs of 50

Price: RFQ
3/8″ x 4″ Lag Screw, Gimlet Point
Part#: 600-100177
3/8″ x 4″ Lag Screw, Gimlet Point

Screws, Lag Screw, Hex Head, 3/8" x 4", Gimble Point, Galvanized Steel, Price Per Ea

Price: RFQ

IMPORTANT PRICING, CHECKOUT, AND SHIPPING INFORMATION!

***Due to continuous volatility of raw material costs seen industry wide, prices and availability are subject to change without notice. Confirmed updated pricing will be returned with shipping quotes within our two-step checkout process.***

We have a multi-step checkout process. Your initial online order does not have shipping costs included and will not be complete without a custom shipping quote. After you submit your initial online order, our Sales Team will generate a personalized quote with the most efficient shipping rate from the warehouse closest to you. You will receive a final quote that will include: updated pricing, estimated lead times, and shipping costs. If you have any questions about this process, please call us at 262-249-8705.