Features & Specifications

  • Three types of Dead-ends offered:  Limited Tension, Medium Tension and High Tension, this item is Limited Tension
  • Fittings and grounding accessories available and can be included in the same container with the suspension.
  • Limited Tension Dead-ends:
    Intended for relatively low tension application usually associated with short span construction. They are not cable
    or line design specific but are designed to fit broad diameter ranges. Holding performance will vary by specific cable
    brand and operating conditions. Therefore, no specific
    holding strength rating is possible.
    In general, Limited Tension Dead-ends are intended for
    use with these conditions and limitations: 
  • Low tensions, approximately:
    – 1,000# (4.4kN) maximum initial (stringing/nominal
    axial/long-term) tension
    – 2,500# (11.1 kN) maximum loaded (working/loaded
    axial/short-term) tension
  • Short spans:
    – 300′ – 600′ (91-183 m) typical maximum spans
    depending upon cable OD and tensions
    – not recommended for critical crossing spans (highways, rivers, etc.); see Medium or High Tension
    Dead-ends
  • Low strength cables 
  • “Standard” jackets 
  • Most cable brands
  • No excessive operating conditions, cable motion or
    high temperatures
  • Standard design parameters
  • Broad cable OD ranges, listed on ID tags
  • Short Structural Reinforcing Rods
  • Short Dead-end component 
  • Structural Reinforcing Rods and Dead-end
    components packaged in same carton.
  • Fast, easy installation
  • Utilizes economical TC-5F Thimble Clevis

    •  

Related Products

12″ Extension Arm, 15º Angle, Fiberglass
Part#: 600-100102
12″ Extension Arm, 15º Angle, Fiberglass

12" Fiberglass Extension Arm, 15-degree Angle, Price Per Ea

Price: RFQ
10,000 lb Strength Pig Ear Guy Attachment, 1/4″ x 2″
Part#: 600-100051
10,000 lb Strength Pig Ear Guy Attachment, 1/4″ x 2″

Guy Attachment, aka Pig Ear, 1/4" x 2" Single Hole, Price Per Ea

Price: RFQ
5′ Fiberglass Tangent Crossarm, #6500 Vertical Load
Part#: 600-100159
5′ Fiberglass Tangent Crossarm, #6500 Vertical Load

Crossarm, Tangent, 3 5/8" x 4 5/8" x 60", Fiberglass, Price Per Ea

Price: RFQ
3/8″ x 4″ Lag Screw, Gimlet Point
Part#: 600-100177
3/8″ x 4″ Lag Screw, Gimlet Point

Screws, Lag Screw, Hex Head, 3/8" x 4", Gimble Point, Galvanized Steel, Price Per Ea

Price: RFQ

IMPORTANT PRICING, CHECKOUT, AND SHIPPING INFORMATION!

***Due to continuous volatility of raw material costs seen industry wide, prices and availability are subject to change without notice. Confirmed updated pricing will be returned with shipping quotes within our two-step checkout process.***

We have a multi-step checkout process. Your initial online order does not have shipping costs included and will not be complete without a custom shipping quote. After you submit your initial online order, our Sales Team will generate a personalized quote with the most efficient shipping rate from the warehouse closest to you. You will receive a final quote that will include: updated pricing, estimated lead times, and shipping costs. If you have any questions about this process, please call us at 262-249-8705.