Tornado Fiber Blower w/ Power Pack

• The Tornado Cable Blowing Machine is designed to be safe, fast
  and effective, even on tough terrain, the Tornado cable blowing machine will
  move fiber optic cable of 0.23 to 1.34 in. (5.84-34mm) diameter
  at speeds to 300 ft./min. (90 m/min.) into pre-installed innerduct or
  direct-buried duct.

  It can accommodate innerduct from .47 to 2.48 in.
  (12-63mm). A conversion kit allows the Tornado to place 12.7/10mm, 12/10mm
  or 10/8mm micro duct into the inner duct. (sold separately)

  ·       
  Comprised of an
  aluminum air box and cable pusher, the Tornado uses compressed air to install
  the cable with or without a missile. In operation, the hydraulically powered,
  caterpillar belt drive system controls the fiber optic cable as it is propelled
  by compressed air into the duct. An electronic monitoring system provides
  read-outs of speed and distance, protects cable against duct obstructions, and
  includes an emergency stop facility.

  ·       
  The air box and cable
  pusher are mounted on a lightweight, tubular-steel frame that can be tilted at
  a 30-degree angle to the manhole, which minimizes significantly any bending of
  the innerduct and cable. The frame has height adjustment to permit ease of
  maneuverability, and adjustable rear legs that provide added stability on
  uneven terrain.

  ·       
  Can also be used
  without the frame, directly from its skid

  ·       
  The Junction Box
  Adapter is a necessary accessory for overriding existing cable in an occupied
  duct (space permitting). One branch attaches to the Tornado for placing the new
  cable or micro ducts, while the other branch seals off and holds the existing
  cable in the duct (sold separately)

  ·       
  Included with the
  Tornado is a convenient toolbox with all the tools needed for use and
  maintenance of your blower

  ·       
  All relevant parts and
  components of the cable blowing machine and the hydraulic power pack are
  specially treated to resist corrosion

  Operating Capacities

  Pushing Force: 0-220 lbs.
  (0-100kg)
  Pushing Speed: 0-300 ft/min (0-90m/min)
  Cable Size: .24-1.34″ (6-34mm) O.D.
  Sub – Duct Size: 1/2-2 1/2″ SDR (12-63mm) O.D.

  Pneumatic System

  Air Hose Bore (min): 1 1/4″
  (32mm)
  Operating Pressure: 175 psi (12 bar)
  Flow: The air
  supply should be filtered, cooled and dry
  For Ducts with an Inner
  Diameter of: Minimum Flow
  Acceptable @175 psi (12 bar)
  0 up to 1″ (0 up to 25mm) : 150 CFM (4m³/min)
  1 up to 1 1/8″ (26 up to 30mm) : 185 CFM (5m³/min)
  1 1/8 up to 1 3/8″ (31 up to 35mm) : 250 CFM (7m³/min)
  1 3/8 up to 1 5/8″ (36 up to 40mm) : 375 CFM (10m³/min)
  1 5/8 up to 1 3/4″ (41 up to 44mm) : 450 CFM (12m³/min)
  1 3/4 up to 2″ (44 up to 51mm): 700 CFM 19m³/min